Phase Formation of Zinc Titanate Precursor Powders Prepared by a Hydrothermal Process in Various pH EnvironmentsWANG, Cheng-Li; HWANG, Weng-Sing; CHU, Hsueh-Liang et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 6, pp 2689-2698, issn 1073-5623, 10 p.Article

Characterization of poorly-crystalline ferric arsenate precipitated from equimolar Fe(III)-As(V) solutions in the pH range 2 to 8LE BERRE, J. F; GAUVIN, R; DEMOPOULOS, G. P et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2007, Vol 38, Num 5, pp 751-762, issn 1073-5615, 12 p.Article

The effect of tannins and pH on the corrosion of steel in wood extractsZELINKA, S. L; STONE, D. S.Materials and corrosion (1995). 2011, Vol 62, Num 8, pp 739-744, issn 0947-5117, 6 p.Article

Characteristics of Interdiffusion between 17-4 PH Steel and NickelLAIK, A; GAWDE, P. S; BHANUMURTHY, K et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2008, Vol 39, Num 4, pp 733-741, issn 1073-5623, 9 p.Article

Effects of pH on phosphating = Ph-Wert-Einfluss auf die PhosphatierungTALAAT EL-MALLAH, A; ABBAS, M.H.Metal finishing. 1987, Vol 85, Num 4, pp 45-47, issn 0026-0576Article

On the Development of Thermo-Kinetic Eh-pH DiagramsROY, Subrata; ZEBARDAST, Hamidreza; ASSELIN, Edouard et al.Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 2012, Vol 43, Num 6, pp 1277-1283, issn 1073-5615, 7 p.Article

The impedance-titrator: A novel setup to perform automated pH-dependent electrochemical experimentsFENSTER, C; ROHWERDER, M; HASSEL, A. W et al.Materials and corrosion (1995). 2009, Vol 60, Num 11, pp 855-858, issn 0947-5117, 4 p.Article

Technical Note: Measurement of pH in Concentrated BrinesHINDS, G; COOLING, P; WAIN, A et al.Corrosion (Houston, Tex.). 2009, Vol 65, Num 10, pp 635-638, issn 0010-9312, 4 p.Article

Copper corrosion in drinking water systems - effect of pH and phosphate-dosageDARTMANN, J; SADLOWSKY, B; DORSCH, T et al.Materials and corrosion (1995). 2010, Vol 61, Num 3, pp 189-198, issn 0947-5117, 10 p.Article

Electrochemical behaviour of Invar in phosphate solutions at pH = 6.0MARTINI, E. M. A; AMARAL, S. T; MÜLLER, I. L et al.Corrosion science. 2004, Vol 46, Num 9, pp 2097-2115, issn 0010-938X, 19 p.Article

Flow Curve Analysis of 17-4 PH Stainless Steel under Hot Compression TestMIRZADEH, Hamed; NAJAFIZADEH, Abbas; MOAZENY, Mohammad et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2009, Vol 40, Num 12, pp 2950-2958, issn 1073-5623, 9 p.Article

The mechanism of pitting of high purity iron in NaCl solutions = Mécanismes de la corrosion par piqûres du fer de haute pureté dans NaClALVAREZ, M. G; GALVELE, J. R.Corrosion science. 1984, Vol 24, Num 1, pp 27-48, issn 0010-938XArticle

Influence de l'acidité de la solution sur l'action inhibitrice de la dioxypropylpyrimidone-2 au cours du dépôt électrolytique du zincGROMAKOV, V. S; TARAN, L. A.Èlektrohimiâ. 1985, Vol 21, Num 7, pp 902-906, issn 0424-8570Article

Anodic dissolution of copper in concentrated LiCl solution at pH between 3 and 7 = Dissolution anodique de Cu dans une solution concentrée de LiCl pour des pH entre 3 et 7BROSSARD, L.Journal of the Electrochemical Society. 1983, Vol 130, Num 2, pp 403-405, issn 0013-4651Article

Spectroscopic study on oxidative dissolution of chalcopyrite, enargite and tennantite at different pH valuesSASAKI, Keiko; TAKATSUGI, Koichiro; ISHIKURA, Kazuhiro et al.Hydrometallurgy (Amsterdam). 2010, Vol 100, Num 3-4, pp 144-151, issn 0304-386X, 8 p.Article

Solution quenched structure of wrought PH 13-8 Mo stainless steelMITTRA, J; DEY, G. K; SEN, D et al.Scripta materialia. 2004, Vol 51, Num 4, pp 349-353, issn 1359-6462, 5 p.Article

Effect of pH and glycolic acid on corrosion of AA6061 alloy in ethylene glycol-water solutionZHANG, D. Q; ZHOU, L. X; RAO, C. Y et al.Materials and corrosion (1995). 2014, Vol 65, Num 1, pp 31-37, issn 0947-5117, 7 p.Article

Environment-Assisted Cracking of Twinning Induced Plasticity (TWIP) Steel: Role of pH and TwinningSINGH RAMAN, R. K; KHALISSI, Muhammed; KHODDAM, Shahin et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2014, Vol 45, Num 4, pp 1979-1995, issn 1073-5623, 17 p.Article

Solvent extraction equilibrium study of manganese( II ) with Cyanex 302 in keroseneNIHAR BALA DEVI; MISHRA, Sujata.Hydrometallurgy (Amsterdam). 2010, Vol 103, Num 1-4, pp 118-123, issn 0304-386X, 6 p.Article

Bacterial community structure change during pyrite bioleaching process : Effect of pH and aerationLIU XINGYU; SHU RONGBO; CHEN BOWEI et al.Hydrometallurgy (Amsterdam). 2009, Vol 95, Num 3-4, pp 267-272, issn 0304-386X, 6 p.Article

The effect of solution temperature and pH on corrosion performance and morphology of nanoceramic-based conversion thin filmEIVAZ MOHAMMADLOO, H; SARABI, A. A; SABBAGH ALVANI, A. A et al.Materials and corrosion (1995). 2013, Vol 64, Num 6, pp 535-543, issn 0947-5117, 9 p.Article

Aqueous stability of thorium and rare earth metals in monazite hydrometallurgy: Eh―pH diagrams for the systems Th―, Ce―, La―, Nd― (PO₄)-(SO₄)-H₂O at 25 °CKIM, Eunyoung; OSSEO-ASARE, K.Hydrometallurgy (Amsterdam). 2012, Vol 113-114, pp 67-78, issn 0304-386X, 12 p.Article

Effect of the metallurgical variables on the yield stress of PH 13-08 steelCLOUE, Jean-Marc; VIGUIER, Bernard; ANDRIEU, Eric et al.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2005, Vol 36, Num 10, pp 2633-2639, issn 1073-5623, 7 p.Article

Effects of pH of n-butyltrimethoxysilane solutions on hydrophobic modification of metal oxidesSANUKI, Sumiko; MIYANO, Masahide; YOSHINAGA, Toshihiro et al.Hyomen gijutsu. 2004, Vol 55, Num 3, pp 192-197, issn 0915-1869, 6 p.Article

Effects of NaCl, pH, and Potential on the Static Creep Behavior of AA 1100QUANHE WAN; QUESNEL, David J.Metallurgical and materials transactions. A, Physical metallurgy and materials science. 2013, Vol 44, Num 3, pp 1311-1319, issn 1073-5623, 9 p.Conference Paper